Drastic Log Format

dt logo 1.5inchThe Drastic LOG format uses the same basic layout as a LOG/~ALG/~ALE. The main differences are the 'Type:' header and the file name in the comment. The comment is broken up into two sections: The initial comment after the ';' and a file name after a second ';'. This page describes the exact file format used for the Drastic log format.

 Here is an example LOG:


Type: DrasticVVWClip
; Example Line (remove semicolon comments at start if copying)
; * ClipName 00:00:00:00 00:00:30:00 ; This is a comment ; C:\Share\ClipNameFile.avi
; ClipName must be 8 characters or less followed by in and out point.
; Comment may be anything but must not contain semicolons.
; ClipFileName must point to a valid media file.
TITLE: noname
REM Format: generic (CMX Like)
REM Record times are PAL
REM system timecode flags must be set to PAL

* Clip: 'src13_re' 00:00:00.00 00:00:10.10 ; This is the comment area ; E:\Media\TestSequences\src13_ref__525.yuv
* Clip: 'src14_re' 00:00:00.00 00:00:10.10 ; ; E:\Media\TestSequences\src14_ref__525.yuv
* Clip: 'src19_re' 00:00:00.00 00:00:10.10 ; ; E:\Media\TestSequences\src19_ref__525.yuv

More great products from Drastic

Optimizing Windows for Drastic Software
Optimizing Windows for Drastic Software When using Drastic software on Windows, for some operations system settings must be altered to allow for the performance necessary for the workflow. This includ... Tips, Tricks and Technical Information
Net-X-Code Quick Start
Net-X-Code Quick Start If you have followed the quick start setup in the manual, your server is now ready to demonstrate all the major features of the Net-X-Code tool set. The easiest... Tips, Tricks and Technical Information
WMVCore.DLL not found error
WMVCore.DLL not found error One of the file format plugins (dtx_aWMFDirect.d1x) for Windows 32 and 64 relies on Microsoft Windows' media components.  With some versions of Windows, li... Tips, Tricks and Technical Information
Up And Down Converter Setup
Up And Down Converter Setup On supported hardware, Drastic software provides control of any up or down video conversion.  This can be set up in real time from the QuickClipXO, MediaNX... Tips, Tricks and Technical Information
OpenMXF support
OpenMXF support Drastic software supports the OpenMXF specification extension to the SMPTE MXF specification (SMPTE 377M). The advantage of OpenMXF is that while the file is st... Tips, Tricks and Technical Information