fbpx

DDRSetup - NetXCode Setup and Licensing

verifycc icon

ddrSetup is part of the ccConvert and Net-X-Code workstation and server software. ddrSetup is a command line tool that can do basic configurations for various Drastic softwares as well as command line licensing for headless servers via terminal/telnet/ssh/etc.

ddrSetup

ddrSetup is part of the ccConvert and Net-X-Code workstation and server software. ddrSetup is a command line tool that can do basic configurations for various Drastic softwares as well as command line licensing for headless servers via terminal/telnet/ssh/etc.

Basic NetXCode Setup

ddrsetup -s netxcode

Enable NetXCode 4 Channel Capture

ddrsetup -s netxsdi

Setup NetXConvert/NetXProxy

ddrsetup -s netxconvert

Setup NetXCode for eMAM (requires manual settings as well)

ddsetup -s eMAM

Generate a site code to request a license

ddrsetup -l -e This email address is being protected from spambots. You need JavaScript enabled to view it. -n "tester test"

Apply the key to enable a license

ddrsetup -l -e This email address is being protected from spambots. You need JavaScript enabled to view it. -n "tester test" -t "the key returned from drastic"

Check the license

ddrsetup -l 

 

Command Line Parameters

ddrsetup - Setup DrasticDDR for specific configurations (v7.1.0.230)
(c) copyright 2012-2020, Drastic Technologies Ltd (www.drastictech.com)
Usage: ddrsetup [-qf] [-s ] [-l -n -e [-r ] ]
  -q = Quiet, not screen output
  -f = Force reset of settings
  -s = Config to setup:
    NetXSDI = Four channel Net-X-SDI
    MediaNXS = Basic MediaNXS
    VEFXi = VEFXi DiamondBlade with capture
    StudioLog = DelTech StudioLog
    NetXConvert = Drastic Net-X-Convert
    NetXProxy = Drastic Net-X-Proxy
    eMAM = eMAM Net-X-Code Basic Setup
    bbReplay = Network camera replay
    Hurricane = Full production replay
    Arri = Arri T-Link capture
    DisableArri = Disable Arri T-Link, set back to normal capture
    AutoDetect = Auto detect and setup channels
    NetworkVideoAnalyzer = IP Video from COTS NIC
  -l -n "Name" -e "email" = Generate site code
  -l -n "Name" -e "email" -r "response" = Authorize system
  -l = Dump license status

 

More great products from Drastic:

Tutorials
Tutorials This article contains video tutorials on various Drastic Products including videoQC, 4kScope/NetworkVideoAnalyzer, Net-X-Code, MediaNXS and DrasticPreview. ... Tips, Tricks and Technical Information
Loop HLS Recording SDI/IP
Loop HLS Recording SDI/IP Net-X-Code supports loop recording of multi bitrate HLS streams from IP or SDI sources.  Setting this up requires configuration of the capture component an... Tips, Tricks and Technical Information
Net-X-Copy - Camera Card Info
Net-X-Copy - Camera Card Info Net-X-Copy is part of the Net-X-Convert/Net-X-Proxy workstation and Net-X-Code server software. It supports, among other things, extracting clips from a nativ... Tips, Tricks and Technical Information
Running videoQC, 4KScope & Apps Remotely
Running videoQC, 4KScope & Apps Remotely 4KScope, videoQC, DrasticPreview, DrasticPreview Pro, and other OpenGL based apps can have trouble displaying the video in an OpenGL plane when connected via Re... Tips, Tricks and Technical Information
MRAnalyze - Command Line Interface
MRAnalyze - Command Line Interface MRAnalyzer is a command line tool that compares an original media file with a compressed version of that file to determine the quality of the compression and ... Tips, Tricks and Technical Information